LED STRIPS- for BACKLIGHTING lightboxes
This is our most cost effective way of lighting an indoor lightbox (from just 4cm deep).
Description
LEDs Strip lighting for Lightboxes don’t usually perform as well as these. Each LED has a special lens projecting light evenly at 170 degrees, so at just 4cm away from the surface, there are no hot spots. We supply this LED strip pre-wired.
When it comes to LEDs for Indoor Lightboxes, you should be using these. Sold as a set of 10 strips (pre-configured to cover a square meter). Each strip is 1M long and mounted on an aluminum PCB, but can be cut into shorter lengths or soldered to make longer ones. We will cut/solder them to ensure that regardless of your lightbox size, the fit-out will be quick and easy.
To keep up to date with new products, click here to follow us on FB
For lightboxes that are exposed to the elements, we recommend:
Single-sided Greater than 6cm deep: 4035W1B Single-Sided WP Module
Double-sided Greater than 15cm deep: 7030W1B Edge-lit Double-Sided Lightbox module
And of course, when we are quoting, we will also include the matched Power Supply for the load.
Additional Information
We sell in sets of 5 strips- prewired.5 strips will light 1.0 X 0.5 M at just 4cm deep.
BUT we can prewire up to 20 strips (2.0 sq meter of coverage at just 4cm deep)
For detailed specifications click here: Spec sheet- Rigid strips
Once you have determined the number of strips required, please click on the Power Supply tab to select the matched Power Supply: LED to power pack spreadsheet
If your Lightbox is either double-sided or exposed to the elements, then please refer to our OUTDOOR light box products
